When installing a stone worktop it is not enough just to precisely work the stone – the foundation of success is a well prepared corpus that can handle the weight and specifics of this material. Here is an overview of the most important rules that the carpenter should think about already in the production of the kitchen.
Stone slabs are significantly heavier than laminate or solid timber.
The body shall be designed to:
Recommendation:
Use high quality DTD or MDF plates with a thickness of min. 18 mm, fixed joints and no compromises in the construction.
If there’s a stone plate on the lockers, DO NOT USE Full top plates to close the corpus.
Instead, use only the mounting strips on the front and back (width approx. 60-100 mm) which serve as support and facilitate handling during installation.
Why?
The stone must be placed directly on the structure, not on the top top plate, and could cause tension, dilation and subsequent damage to the stone.
The upper edge of the corpus must be Absolutely equal and in one plane.
The installation of stone does not compensate for inequalities, as is common with the laminate.
✔✔ Before installation we always recommend to do a flatness control measurement.
There shall be no empty space under the stoneboard without support.
For hobs, sinks or dishwashers, add mounting strips (panes) to provide support.
Beware of dishwashers – produce moisture. Protective foil and correct ventilation are necessary.
All cuts (for sink, hob, batteries, etc.) are implemented in stoneware production Not in the carpenter’s workshop.
But what you can prepare:
✔✔ Always provide precise technical drawings The communication between the carpenter and the stonemason is crucial.
Ideal assembly order:
Each project is specific. recommended:
Regular communication between carpenter, architect and stonemaker prevents unnecessary errors, time losses and complaints.